 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Features Pb-free. Inner reflector. White package. Optical indicator. P-LCC-2 package. Wide viewing angle. Colorless clear resin. PreconditionBase on JEDEC Level-2. ESDUp to 2KV. (Base JESD22-A114-B) The product itself will remain within RoHS compliant version. Suitable for vapor-phase reflow, infrared reflow and wave solder processes. Descriptions The 67-01 series is available for orange, green, blue and yellow or other color due to the different raw material. Base on the package design, the device result in wide view angle. Applications OA Equipment Backlighting of Full Color LCD Automotive Equipment Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Material AlGalnP Brilliant Yellow Water Clear Emitted Color Resin Color Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 1 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 2 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Tsol Rating 5 50 -40 ~ +100 -40~ +100 2000 120 100 Unit V mA V mW mA Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Symbol Iv 21/2 p d VF IR Min. 450 --------585.5 ----1.95 ----- Typ. ----120 591 ----20 --------- Max. 900 --------591.5 ----2.35 10 Unit mcd deg nm nm nm V A Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 3 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Bin Range of Luminous Intensity Bin Min. U1 450 U2 565 V1 715 Bin Range of Dominant Wavelength Group C Bin Code Min. 585.5 588.5 D3 D4 Bin Range of Forward Voltage Bin Min. 1 1.95 2 2.15 Notes: Max. 565 715 900 Max. 588.5 591.5 Max. 2.15 2.35 Unit mcd Condition IF=20mA Unit nm Condition IF=20mA Condition IF=20mA Unit V 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 4 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Current IF (mA) 100 75 Ta=25C 70 60 50 40 30 20 Forward Current vs. Forward Voltage Ta=25C Relative luminous intensity (%) 50 25 0 500 550 600 650 Wavelength (nm) 700 1.0 1.4 1.8 2.2 2.6 3.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25C Relative luminous intensity (%) 1000 f=1KHz Duty=1/10 Relative luminous intensity (%) 1000 Relative Luminous Intensity vs. Ambient Temperature 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 10 1 10 2 Ambient Temperature Ta (C) Forward Current Derating Curve Forward Current IF (mA) 80 70 60 50 40 30 20 10 0 20 40 60 85 100 1.0 0.9 0.8 0.7 Forward Current IF (mA) Radiation Diagram 0 10 Ta=25C 20 30 40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 5 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 6 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is 0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 7 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 2605 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA / 25 85/85%RH Test Sample Ac/Re Hours/Cycles Size 6 min 300 Cycles 22 PCS. 22 PCS. 0/1 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 8 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. . 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 9 of 10 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs with Black Surface 67-01/YSC-CU1V1/2T/MS 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. :DSE-671-B22 http://www.everlight.com prepared date:14-Dec-2006 Rev. 1 Page: 10 of 10 Prepared by: Teresa Lee |
Price & Availability of 67-01YSC-CU1V1-2T-MS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |